| |
News |
|
|
The LKM263 is a digital programmable measuring transducer for resistance sensors with a 4 to 20 mA current output designed for installation on a 35-mm top hat rail. A PC and programming cable are used to specify sensor type, measuring range and circuit type. Minor corrections can be carried out with the zero point controller. The LKM263 can be operated with a 2-lead, 3-lead or 4-lead circuit.
 Data-Sheets (PDF 61 KB)
Instruction-Manual (PDF 40 KB)
 Pricelist
|
 |
The LKM264 is a digital programmable measuring transducer for resistance sensors with a 0 to 10 V current output designed for installation on a 35-mm top hat rail. A PC and programming cable are used to specify sensor type, measuring range, and circuit type. Minor corrections can be carried out with the zero point controller. The sensor is connected with a 3-lead or 4-lead circuit.
Data-Sheets (PDF 61 KB)
Instruction-Manual (PDF 40 KB)
Pricelist |
|
Programming kit for all programmable transmitter of LKM electronic GmbH. ( except LKM120 and LKM121 ).
The kit includes a programming cable (USB) software included.
Pricelist |
|
The LKM114 is a digital configurable measuring transducer for Pt100/Pt1000 with a 0 to 10 V voltage output. Use 4 jumpers to set 12 different measuring ranges. Minor corrections can be carried out on site using the zero point controller. The sensor is connected with a 3-/2-lead circuit
Instruction-Manual (PDF 60,6 KB)
Data-Sheets (PDF 57 KB)
Pricelist |
|
The LKM113 is a digital configurable measuring transducer for Pt100/Pt1000 with a current output of 4...20 mA. The unit feature 4 jumpers used to set 12 different measuring ranges. Smaller corrections can be made on-site using the zero-point controller. The sensor is connected with a 3/2 wire circuit.
Instruction-Manual (PDF 60,6 KB)
Data-Sheets (PDF 742 KB)
Pricelist |
|
Digital configurable measuring transducer to mount on 35-mm rail with voltage output of 0 to 10 V and a supply voltage of 24 V
The LKM274 is a digital configurable measuring transducer for Pt100/Pt1000 with a 0 to 10 V voltage output. The transducer is designed for installation on a 35-mm top hat rail. Use 4 DIP switches to set 13 different measuring ranges. Minor corrections can be carried out with the zero point controller. The sensor is connected with a 3-/2-lead circuit.
Instruction-Manual (PDF 60,6 KB)
Data-Sheets (PDF 57 KB)
Pricelist |
|
Digital configurable measuring transducer to mount on 35-mm rail with current output of 4 to 20 mA and a supply voltage of 24
The LKM273 is a digital configurable measuring transducer for Pt100/Pt1000 with a 4 to 20 mA current output. The transducer is designed for installation on a 35-mm top hat rail. Use 4 DIP switches to set 13 different measuring ranges. Minor corrections can be carried out with the zero point controller. The sensor is connected with a 3-/2-lead circuit. The sensor is detected automatically.
Instruction-Manual (PDF 60,6 KB)
Data-Sheets (PDF 742 KB)
Pricelist |
|
The LKM 120 is a freely programmable measuring transducer without adjuster for PT100 acc. to DIN EN 60751 as well as Ni100. It converts the temperature-dependent resistance linearly as a function of temperature into a standard current signal of 4 to 20 mA with a high degree of precision. The LKM 120 measuring transducer is operated as a 3-lead or 4-lead circuit, which means the input lead resistances are for the most part compensated.
An optional programming kit to be used with the USB interface (LKM120P) is available as well.
Instruction-Manual (PDF 60,6 KB)
Data-Sheets (PDF 43 KB)
Pricelist |
|
The LKM type 121 is a programmable measuring transducer without adjuster for different resistance sensors and thermocouples. It converts the temperature-dependent measured values of the sensor temperature-linear into a standard current signal of 4 to 20 mA with a high degree of accuracy. The LKM type 121 measuring transducer is operated as a 3-lead or 4-lead circuit, which means the input lead resistances are for the most part compensated. The transmitter is also able to convert not temperature-dependent resistances and voltages into a loop signal. It is galvanically isolated and works with an isolation voltage of up to 1500 V. An optional programming kit to be used with the USB interface is available as well.
Pricelist |
|
|
